Machines - Manual, Automatic, Hydraulic, Long Bore and Custom

Choose from one of our standard ballizing machines, or have one custom built for you.  We are EU certified.  Our engineering department can help you with any questions that you may have.

Machines models available in sizes to 10 tons with correspondingly greater capabilities. 

Machines are available for purchase, or for lease. 

Here are just a few of our machines. 

Clicking on a picture will bring up a larger view of the machine.

FU-10.25A (1.25 Ton Air) 1500 pcs/hour Automatic Machine This is a universal Ball-O-Matic® model with interchangeable ball tracks and tooling, which is hand operated with an I.D. range of .06 -.625 inches. Maximum length of hole or height of part 2.50 inches, maximum throat of ball track 3.00 inches, required air pressure is 80 Ibs constant. 0verall size of machine 42" w x 24" d x 76" h.	Automatic Universal FU-10.25A 1600 pcs/hour Automatic Machine This is a converted universal Ball-O-Matic® Its automatic attachments can be removed quickly and easily for conversion back to hand-operated and vice versa. It's just a matter of adjusting a few screws. Except for the increase in size, specs are the same as FU-1 0.25 A. Automatic control circuitry is air logic. Production rate capability can be up to 5,000 pcs per hour, depending on the part.	FU-5A (1/2 Ton Air) 600 pcs/hour Manual Machine This machine has an I D range of .020 -.140 inches; maximum hole length 1.00 inches; maximum throat of track, 1.250 inches; required air pressure 40-70 lbs; overall size 9" w x 12" d x 22" h.
Horizontal Ballizing Machine National Ball-O-Matic® offers a horizontal machine that can finish a 16 foot long tube with a 2" I.D., thus eliminating some very expensive honing. The tube is hand loaded into a retaining nest that keeps it straight during the ballizing operation. The retaining nest corrects part of the camber (bowed condition) of the tube during ballizing. This is a self-contained hydraulic unit that conserves floor space. The variable pump from 0 -3,000 P.S.I. has speed controls for the ballizing ram. The ball track can be changed according to your specifications on a machine like this, ranging from 2" to 6" I.D.	Long Bore FU-100-H.H (10 Ton Hydraulic) 600 pcs/hour Horizontal Machine for Long ID and Long Parts A shock absorber tube sizing machine is another special item developed by National Ball-O-Matic®. Production rate is 4 tubes in 4 1/2 seconds. The hot work-hardening effect of ballizing strengthens the wall of the tube, increases the wear life of the shock absorber and improves the micro finish to 5-10 R.M.S.	FU-7.5A (3/4 Ton Air) 600 pcs/hour Manual Machine his machine has an ID range of .062 -.375 inches; maximum hole length 1.750 inches maximum throat of track 2.250 inches; required air pressure 40-70 lbs; overall size 13" w x 15" d x 29" h. Automatic Fixtures for single piece shuttle operation, produces production rates of 2,500 -3,000 pcs per hour. Includes feed shuttle and dome-covered parts hopper. Operation is fully automatic, including ejection of parts into receptacle. Machine automatically shuts down if part is not in position or if ball is not in position. Machine models available in sizes to 10 tons with correspondingly greater capabilities.
	(Back to Top)